International
Spain
Sweden
Key contribution
All of Ecophon’s low emitting ceiling products have the Finnish M1 and French A+ labels, which means they meet the requirement in Part 4: Insulation.
Aim
To minimize the effect of VOCs in building materials on indoor air quality.
Detailed requirement
Interior Paints and Coatings
- 100% of installed products meet California Air Resources Board (CARB) 2007, Suggested Control Measure (SCM) for Architectural Coatings, or South Coast Air Quality Management District (SCAQMD) Rule 1113, effective June 3, 2011 for VOC content.
- At minimum 90%, by volume, meet the California Department of Public Health (CDPH) Standard Method v1.12010 for VOC emissions.
- Applicable national VOC content regulations or conduct testing of VOC content in accordance with ASTM D236910; ISO 11890, part 1; ASTM D6886-03; or ISO 11890-2.
Interior Adhesives and Sealants
- 100% of installed products meet South Coast Air Quality Management District (SCAQMD) Rule 1168, July 1 2005 for VOC content.
- At minimum 90%, by volume, meet the California Department of Public Health (CDPH) Standard Method v1.12010 for VOC emissions.
- Applicable national VOC content regulations or conduct testing of VOC content in accordance with ASTM D236910; ISO 11890, part 1; ASTM D6886-03; or ISO 11890-2.
Flooring & Insulation
Newly installed solutions must meet all limits set by the California Department of Public Health (CDPH) Standard Method v1.1-2010.
Furniture and Furnishings
The VOC emissions of at least 95% (by cost) of all newly purchased furniture and furnishings within the project scope must meet all limits set by the ANSI/BIFMA e3-2011 Furniture Sustainability Standard sections 7.6.1 and 7.6.2, tested in accordance with ANSI/BIFMA Standard Method M7.1-2011.
See detailed requirement for VOC reduction
Our contribution
Ecophon offers the market's widest range of sound absorbers with extremely low VOC and formaldehyde emissions. All our sound absorbers comply with the toughest emission tests, including French A + and the California Emission Regulation. This means you can choose freely from all our products and always be certain of the lowest possible emissions.
All Ecophon products are approved according to the Finnish M1 and French A+ labels. In combination, these two labels are considered to be equivalent to California Department of Public Health (CDPH) Standard Method v1.1-2010, meaning Ecophon’s products meet the requirement in Part 4: Insulation.
