See below how Fire resistant & High security glass for facades by Vetrotech can contribute to LEED criteria: Construction and demolition waste management
When it comes to energy efficiency, all Vetrotech products can be combined with multi-comfort features, providing a series of functions contributing to the improvement of the energy performance of buildings. Available in double or triple glazing, incorporating solar control and/or low-emissivity coatings, our products comply with the most demanding energy standards and regulations.
To achieve increasing levels of energy performance beyond the prerequisite standard to reduce environmental and economic harms associated with excessive energy use.
The project’s energy performance is assessed and compared to the baseline. Points are awarded according to the percentage of improvement between the two (see table below).
Read the detailed requirement for Optimize Energy Performance
The ideal glass is one that permits the greatest amount of natural light to enter a building while reducing over-heating by solar heat gain. When considering whole building energy efficiency and performance, Vetrotech glass can contribute to minimizing solar heat gain and reducing the load on your air-conditioning systems. All the Vetrotech solutions have options for low-E coated glass, which helps reflect energy and insulate the interior of the building.
To maximize daylight and, views to the outside and to optimize building occupants’ comfort, all the IGU, DGU and TGU high protection solutions can deliver thermal insulations performances too. These solutions limit heat transfers through the glass inside/outside and insulate the interior of the building, avoiding heat loss.
Vetrotech solutions can easily be assembled as an insulating glass with a glass product from the COOL-LITE range (such as COOL-LITE XTREME 70/33 II), or can be mounted with integrated blinds, CLIMAPLUS SCREEN, to add privacy control. Such energy efficient solutions help to decrease a building’s cooling loads thanks to lower solar heat gains (low g-value). Vetrotech solutions can be assembled as insulating glass, with a glass product from the PLANITHERM range. Such coated glass products help to reduce heating needs by minimizing heat loss (low Ug value), while allowing visible natural light.
Vetrotech IGU, DGU and TGU products enable high-density areas to comply with strict fire codes and high security expectations, while at the same time contributing to the energy efficiency of the building.
A tempered fire-resistant glass with special edge treatment to withstand high thermal stress.
A transparent tempered fire-resistant glass with a special heat-reflective coating that offers heat radiation reduction in case of fire.
A fire-resistant glass made of tempered safety glasses, providing heat and smoke insulation during a given period of time
A laminated high-security glass solution which consists of a multi-layer lamination of PVB interlayer films and glass panes.
Discover other contributing solutions:
See below how Electrochromic glass by SageGlass can contribute to LEED V4.0 BD+C new construction.
See below how Insulation solutions by ISOVER can contribute to LEED V4.0 BD+C new construction.